Stairworks

FEH-I 40 (Surface Element Support)

Material:
PA-GF, black
Fixation set galvanized

The surface element support enables the clamping of panels of 4, 6 or 8 mm thickness.
The support can be used with a Ø40 tube (min. wall thickness 3mm). Only a 4.5mm hole has to be bored into the tube where the support is then fixed with a thread former screw.

FEH-I 40 (Surface Element Support)
Code Number	Type
91803	FEH-I 40


Raised Platform and Stairs	Catwalk Over Conveyor Line	Custom Platform and Guard	Basic Safety Rail System

We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Krieger is not responsible for inadvertent errors.