Qube Linears Accessories

KR Motion Clamp for Qube Tubular Linear Unit E

Once you have determined the configuration of the basic Rose+Krieger Qube E linear drive body (right or left, right and left, split spindle) and you have figured the basic body size 18/30/40/50/60/80mm) and travel length (overall length, you must then pick a motion clamp(s). Note: All right and left, and split spindle units require 2 motion clamps. Normally, these are both the same type.

Note: The Qube E Motion clamps are modified version of the RK Industrial and Block clamps as show in the clamp section of this website. These clamps are custom machined to fit the Qube E units, and are painted black. These are alqays factory installed. The off-the-shelf RK clamps will not work. If the standard black paint finish is a problem, these clamps can be supplied in the standard RK tumbled bare aluminum finish.

Motion Clamps Needed

Right Hand Spindle:
Left Hand Spindle:
Right and Left Hand Spindle:
Split Spindle:

1 Motion Clamp per Qube E Linear Body
1 Motion Clamp per Qube E Linear Body
2 Motion Clamps per Qube E Linear Body
2 Motion Clamps per Qube E Linear Body

Slide Bushings

The optional Slide Bushing is a delrin type plastic bushing that is machined into the motion clamp hole and is mounted onto the Qube E linear body. This bushing provides an even smoother travel for the motion clamp over the standard Aluminum clamp/zinc tube arrangement. The slide bushings require machining and must be factory installed.

Dimensions in millimeters unless otherwise noted
KR Motion Clamp for Qube Tubular Linear Units E
Code Number	Type	A	B	C	M	V1	V2
Without Slide Bushings
13005_ _ _	30	30	86	45	33	M8x35	M83x5
14005_ _ _	40	40	117	60	47	M10x50	M8x45
25005_ _ _	50	50	126	86	53	M8x50	M8x50


		clamping A	Equipment: 0 = screws 1 = 1 lever 2 = 2 levers
	element clamping V		Equipment: 0 = screws 1 = 1 lever 2 = 2 levers
0 = without slide bushing 1 = with slide bushing


Heavy Duty Mobile Adjustment Stand	Labeling Stand with Control	Adjustable Attachment Systems for Packaging and Product Labels	X-Y-Z Belt Driven Gantry System

We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Krieger is not responsible for inadvertent errors.