Qube Linears Accessories

K* Motion Clamp for Qube Tubular Linear Units E

Once you have determined the configuration of the basic Rose+Krieger Qube E linear drive body (right or left, right and left, split spindle) and you have figured the basic body size 18/30/40/50/60/80mm) and travel length (overall length, you must then pick a motion clamp(s). Note: All right and left, and split spindle units require 2 motion clamps. Normally, these are both the same type.

Note: The Qube E Motion clamps are modified version of the RK Industrial and Block clamps as show in the clamp section of this website. These clamps are custom machined to fit the Qube E units, and are painted black. These are alqays factory installed. The off-the-shelf RK clamps will not work. If the standard black paint finish is a problem, these clamps can be supplied in the standard RK tumbled bare aluminum finish.

Motion Clamps Needed

Right Hand Spindle:
Left Hand Spindle:
Right and Left Hand Spindle:
Split Spindle:

1 Motion Clamp per Qube E Linear Body
1 Motion Clamp per Qube E Linear Body
2 Motion Clamps per Qube E Linear Body
2 Motion Clamps per Qube E Linear Body

Slide Bushings

The optional Slide Bushing is a delrin type plastic bushing that is machined into the motion clamp hole and is mounted onto the Qube E linear body. This bushing provides an even smoother travel for the motion clamp over the standard Aluminum clamp/zinc tube arrangement. The slide bushings require machining and must be factory installed.


	Dimensions in millimeters unless otherwise noted.

*K Motion Clamp for Qube Tubular Linear Units E**
Code Number	Type	A	B	C	M	V
Without Slide Bushings
11801_ _ _	18	18	66	25.5	20	M6x16
13093_ _ _	30	20	99	40	33	M8x25
12501_ _ _	30	25	99	40	33	M8x25
13001_ _ _	30	30	99	40	33	M8x25
14001_ _ _	40	40	137	60	45	M10x35
15003_ _ _	50	40	143	65	53	M10x60
15001_ _ _	60	60	190	80	65	M12x45
16001_ _ _	60	60	190	80	65	M12x45
18001_ _ _	80	80	255	120	90	M16x65

*Same external diameter of the mounting sleeves but different internal diameter of the mounting bores

Equipment:
0 = screws
1 = 1 lever

clamping A

element clamping V

0 = without slide bushing
1 = with slide bushing


Heavy Duty Mobile Adjustment Stand	Labeling Stand with Control	Adjustable Attachment Systems for Packaging and Product Labels	X-Y-Z Belt Driven Gantry System

We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Krieger is not responsible for inadvertent errors.