Qube Linears Accessories

FSB Motion Clamp for Qube Tubular Linear Unit E

Once you have determined the configuration of the basic Rose+Krieger Qube E linear drive body (right or left, right and left, split spindle) and you have figured the basic body size 18/30/40/50/60/80mm) and travel length (overall length, you must then pick a motion clamp(s). Note: All right and left, and split spindle units require 2 motion clamps. Normally, these are both the same type.

Note: The Qube E Motion clamps are modified version of the RK Industrial and Block clamps as show in the clamp section of this website. These clamps are custom machined to fit the Qube E units, and are painted black. These are always factory installed. The off-the-shelf RK clamps will not work. If the standard black paint finish is a problem, these clamps can be supplied in the standard RK tumbled bare aluminum finish.

Motion Clamps Needed

Right Hand Spindle:
Left Hand Spindle:
Right and Left Hand Spindle:
Split Spindle:

1 Motion Clamp per Qube E Linear Body
1 Motion Clamp per Qube E Linear Body
2 Motion Clamps per Qube E Linear Body
2 Motion Clamps per Qube E Linear Body

Slide Bushings

The optional Slide Bushing is a delrin type plastic bushing that is machined into the motion clamp hole and is mounted onto the Qube E linear body. This bushing provides an even smoother travel for the motion clamp over the standard Aluminum clamp/zinc tube arrangement. The slide bushings require machining and must be factory installed.

Part Number Example: 118010018
118010118
118010218

0 = screws
1 = 1 lever
2 = 2 levers

FSB Motion Clamp for Qube Tubular Linear Units E
Code Number	Type	B	C	D	L	M1	M2	M3	V
Without Slide Bushings
240120040	40	65	92	8.5	75	38	42	74	M8X45
250120050	50	80	110	8.5	90	47	60	90	M8X55
240120140	40	65	92	8.5	75	38	42	74	M8X45
240120140	50	80	110	8.5	90	47	60	90	M8X55
250120218	40	65	92	8.5	75	38	42	74	M8X45
250120230	50	80	110	8.5	90	47	60	90	M8X55
With Slide Bushings
240121040	40	65	92	8.5	75	38	42	74	MX845
250121050	50	80	110	8.5	90	47	60	90	M8X55
240121140	40	65	92	8.5	75	38	42	74	MX845
250121150	50	80	110	8.5	90	47	60	90	M8X55
240121240	40	65	92	8.5	75	38	42	74	MX845
250121250	50	80	110	8.5	90	47	60	90	M8X55
Dimensions in millimeters unless otherwise noted.


Heavy Duty Mobile Adjustment Stand	Labeling Stand with Control	Adjustable Attachment Systems for Packaging and Product Labels	X-Y-Z Belt Driven Gantry System

We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Krieger is not responsible for inadvertent errors.