Qube Linears

Tubular Linear Units E - Right and Left Hand Thread

Function:
Two motion clamps are required for each right and left hand unit. With the right and left hand RK Qube E linear units, the two motion clamps move apart or together with a single rotating input, similar to the jaws of a vise. Please specify total travel length required when ordering.

Qube E Tubular Linear Units - Right and Left Hand Thread
Code Number	Type	Spindle	Basic Length¹⁾	B	D1	D2	J	L1	L2	L3³⁾	M	P1	P2	R⁴⁾	V	Max. travel	Weight lbs.
Code Number	Type	Spindle	Basic Length¹⁾	B	D1	D2	J	L1	L2	L3³⁾	M	P1	P2	R⁴⁾	V	Max. travel	basic length²⁾	max. 100mm travel
70318_ 1	18	10x2	195	18	6	6	24	17	17	37	18	2x2x12	2x2x12	55	M3x5	280	0.330	0.097
70330 _ _	30	14x3	265	30	8	8	38	26	26	29	28	2x2x20	2x2x20	80	M4x8	1170	0.595	0.205
783 40 _ _	40	20x4	269	40	12	12	55	38	38	*	44	4x4x32	4x4x32	77	M6x10	2560	1.742	0.432
78340 _ _	40	20x4	269	40	12	12	55	38	38	-	44	4x4x32	4x4x32	77	M6x10	2560	1.742	0.432
70350 _ _	50	20x4	325	50	12	12	63	38	38	29	44	4x4x32	4x4x32	85	M6x10	2560	4.156	0.640
* 70360 _ _	60	24x5	385	60	14	14	78	38	38	29	50	5x5x32	5x5x32	100	M8x12	2460	7.390	0.950
* 70380 _ _	80	32x6	460	80	20	20	100	31.5	31.5	50	70	6x6x22	6x6x22	130	M8x25	2500	13.290	1.940

Standard Unit (zinc-plated)		Stainless Steel Unit

Spindle with slide bearing	Spindle with ball bearing	Spindle (stainless steel) with slide bearing	Spindle (stainless steel) with ball bearing (steel)**	Spindle a. ball bearing (stainless steel)

1 = 1 drive pin on the left hand thread side
2 = 1 drive pin on the right hand side
3 = 2 drive pins

Order example:
E50, right and left hand thread, spindle with ball bearing, 1 drive pin on the right hand thread side, travel 650 mm

Code nº + length (basic length+travel)

703 502 1 0975

* sizes 18, 60 and 80 not available with slide bearing
**not with type E-II 40

⁴⁾modification for smaller length
Type	Total Length	R
E 18	< 300 mm	25
E 30	< 500 mm	40
E 40	<500 mm	60
E 50	< 500 mm	65
E 60	< 500 mm	80


Heavy Duty Mobile Adjustment Stand	Labeling Stand with Control	Adjustable Attachment Systems for Packaging and Product Labels	X-Y-Z Belt Driven Gantry System

We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Krieger is not responsible for inadvertent errors.