Quad Linears Accessories

Angular Drive for PLS-II Linear Units

Back To PLS-II Accessories Intro Page

Variant E

Variant K

Variant K and E as well as other shaft variation possibilities upon request.

Example of Applications

• optional helical or straight bevel gears • optional solid or hollow shafts • good mounting possibilities due to tapped holes in combi cube • high lifetime* due to oil lubrication • max speed** 2500 min-1
• drive and transmission shaft with roller bearing • housing AlMgSi, black anodized • operating temperature -18ºC to +80ºC

Angular Drive for PLS-II Linear Units

Code
Number

Version

9158_2300_

drive pin, long/hollow pin, short same in and output directions

9158_1300_

drive pin short / hollow pin, short different in- and output directions

9158_3300_

hollow pin, short / hollow pin, short different in- and output directions

9158_3400_

hollow pin, long / hollow pin, short same in- and output direction

9158_3330_

hollow pin, short / hollow pin, short different in- and output directions

9158_1340_

drive pin, short / hollow pin, short and long same in- and output direction

A = straight toothed, i=1:1.5
B = helical toothed, i=1:1
C = straight toothed, i=1:1
D = straight toothed, i=1:1.5
E = straight toothed, i = 1:1.5

Size
3 = 30
4 = 40
5 = 50
6 = 60
8 = 80

"rising" and "falling" version refers to clockwise rotation of the drive pin.

Note:
The bevel gear and the end part of the linear unit to be connected may have different measures. Accessories for the connection to the bevel gear are available upon request.

MaB	PLS-II	30	40	50	60	80
A		50	64	74	84	108
B		36	40	40	50	67
C		25	32	37	42	54
D		8	10	12	14	16
e		61	72	77	92	121
F		4	4	4	5	6
G		M4-10 deep	M5-12 deep	M6-15 deep	M6-15 deep	M8-16 deep
H		21	29	38	43	64
J		20	30	30	40	50
K		M5-5.5 deep	M5-7.5 deep	M6-10 deep	M6-10 deep	M8-12 deep
L		25	28	30	30	38
M		M4x80 DIN 912	M5-85 DIN 912	M6x80 DIN 912	M6x110 DIN 912	M8x130 DIN 912
P		2x2x20	3x3x20	4x4x20	5x5x25	5x5x32
max. starting moment		3.6 Nm	6.4 Nm	10 Nm	15.4 Nm	25.4 Nm
max. torque**		1 Nm	3 Nm	4.5 Nm	6.5 Nm	11 Nm
Dimensions in millimeters unless otherwise noted
* mech lifetimg ~ 10.000 h with 1.000 min^-1
** in case of a faster transmission i=1:1.5 max. input rpm 1.600 min^-1


Heavy Duty Mobile Adjustment Stand	Labeling Stand with Control	Adjustable Attachment Systems for Packaging and Product Labels	X-Y-Z Belt Driven Gantry System

We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Krieger is not responsible for inadvertent errors.