Linears With Timing Belt Drive

Profile Linear Unit PLZ-i-II - Timing Belt Inside the Guide Profile

Function:
A rotating movement of the drive pin is converted into the linear movement of the guide table.
As opposed to the linear unit PLZ-II the timing belt is carried inside the guide profile. The axial slot of the guide profile is covered with a cover band.

Profile Linear Unit PLZ-i-II - Timing Belt Inside the Guide Profile
Code Number	Type	Timing Belt	Basic Length*	B	C	D1	D2	F	G1	G2	H	J	K	L1	L2	L3	M1	M2	M3	M4	P	Q	R	T1	T2	W	Max. Travel	Weight [kg]
Code Number	Type	Timing Belt	Basic Length*	B	C	D1	D2	F	G1	G2	H	J	K	L1	L2	L3	M1	M2	M3	M4	P	Q	R	T1	T2	W	Max. Travel	Basic Length	per 100mm Travel
FZI 3030_A	PLZ-i-30	3M-6	176	90	50	22^J6	6	4.5	M4	M5	15	102	38	25	6	15	21	6	20	-	2x2x20	30	37	8.5	4.5	10.1	4590	0.92	0.15
FZI 4040_A	PLZ-i-40	3M-9	226	120	65	30^J6	8	6.5	M5	M6	20	132	48	28	6	20	29	10	20	-	2x2x20	40	47	11.5	7	10.1	5090	2.10	0.28
FZI 5050_A	PLZ-i-50	5M-15	276	150	78	35^J6	10	9	M6	M6	25	162	58	30	6	25	38	15	20	20	3x3x20	50	57	11.5	7	10.1	5398	3.92	0.40
FZI 6060_A	PLZ-i-60	5M-20	318	180	98	35^J6	12	11.5	M6	M6	30	192	72	30	6	30	43	20	20	20	4x4x25	60	63	11.5	7	10.1	5808	7.15	0.61
FZI 8080_A	PLZ-i-80	5M-30	378	200	118	50^J7	14	21.5	M8	M8	40	212	92	38	6	40	64	20	40	40	5x5x32	80	83	11.5	7	10.1	5788	10.52	0.91

shaft arrangement

*The basic length is the length of the unit without travel

	Order example PLZ-i-II 30 shaft arrangement "C", travel 500 mm
	code nº = length (basic length + travel) FZI 3030 CA 0676

	FZA3030CA 0676


Heavy Duty Mobile Adjustment Stand	Labeling Stand with Control	Adjustable Attachment Systems for Packaging and Product Labels	X-Y-Z Belt Driven Gantry System

We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Krieger is not responsible for inadvertent errors.