Lifting Devices

MultiLift

Left: Version A

Right: Version B,
with milled slots

The MultiLift is used for the continuous height adjustment of tables, assembly workstations, equipment, etc.
     The MultiLift can be run separately or in parallel pairs. To guarantee exact synchronization of several actuators (up to 4) a special version with drive control is available.
     It is possible to lift up to 3000 N per actuator. Max Standard travel length is 500 mm (customized travel lengths available upon request).
     The 24 V DC motor is run by means of a control/transformer unit (230 V AC/120 V DC).
     Combined with a 160 VS control, MultiLift is also suitable for use in medical equipment.

Features:
• Height adjustment of assembly tables and devices
• Extruded aluminum profile with longitudinal slots
• Quadruple bearing with POM plain bearing race
• Integrated limit switch (with Hall sensor at option)
• Self-locking
• Surface anodized natural color, color powder-coating optional
• Individual or synchronizing control available
• Customized travel lengths on request

MultiLift
Code Number	Type	Total Travel	Installation Height	Max. Stroke Speed	Max. Lifting Force	Weight kg.
qab 00 ac 10 0470	Left Hand	470 mm	695 mm	-	1.000N	11.2
qab 00 ac 11 0470	Right Hand	470 mm	695 mm	-	1.000N	11.2
qab 13_g 0)0355	MultiLift 350	355 mm	550 mm	8 mm / s	3.000 N	9.1
qab 13_g 0_0 400	MultiLift 400	400 mm	595 mm			10.0
qab 13_g 0_0 450	MultiLift 450	452 mm	650 mm			10.8
qab 13_g 0_0 500	MultiLift 500	498 mm	695 mm			11.5
qab 26_g 0_0 355	MultiLift 350 s	355 mm	550 mm	16 mm / s	1.000N	9.1
qab 26_g 0_0 400	MultiLift 400 s	400 mm	595 mm			10.0
qab 26_g 0_0 450	MultiLift 450	452 mm	650 mm			10.8
qab 26_g 0_0 500	MultiLift 500	498 mm	695 mm			11.5

1 = version B (with milled slots)
2 = version A (without milled slots)
3 = version B for synchronized control
4 = version A for synchronizes control

color powder coats upon request

h = for compressiv load (standard)
i = for compressive and tensile load (add.
bottom assembly plate
m = for compressive and tensile load (add. bottom compression
plate)

We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Krieger is not responsible for inadvertent errors.


Labeling Machine	Transfer System	X-ray Machine	Height Adjustable Assembly Stations