Lifting Devices

MultiLift with Incorporated Carriage

MultiLift with incorporated carriages can be used for the continuous height adjustment of equipments, operating units, visual displays, etc.
     Differently from the standard MultiLift there is here no inner profile running out of the telescopic column but a carriage running within the column casing. Because of the slots on the carriage it is possible to fit and position any equipment.
     The columns can be driven in single or pairwise parallel mode. A special control unit is available which guarantess the perfect synchronization of several actuators (up to 4).
     Possible lifting power up to 3.000 N per actuator for a total standard travel length of 500 mm (special travels upon request).
     It is driven by means of a 24 V DC geared motor generally rund by a control/transformer unit (230 V AC/120 V DC).

Features:
• height adjustment of instruments and equipments
• extruded aluminum profiles with longitudinal slot
• quadruple bearing with POM slide bushing
• high-power DC motor
• integrated limit switch strip for stroke limiter
• self locking even under max. loads
• profiles with clear anodized surface
• single and synchronous operation mode possible
• customized stroke lengths upon request

MultiLift with Incorporated Carriage
Code Number	Type	Total Travel	Installation Height	Max. Stroke Speed	Max. Lifting Force	Weight kg.
qab 13_g 0_0 355	MultiLift 350	355 mm	557.5 mm	8 mm / s	3.000 N	6.4
qab 13_g 0_0 400	MultiLift 400	400 mm	602.5 mm			6.7
qab 13_g 0_0 450	MultiLift 450	452 mm	657.5 mm			7.1
qab 13_g 0_0 500	MultiLift 500	498 mm	702.5 mm			7.4
qab 26_g 0_0 355	MultiLift 350 s	355 mm	557.5 mm	16 mm / s	1.000 N	6.4
qab 26_g 0_0 400	MultiLift 400 s	400 mm	602.5 mm			6.7
qab 26_g 0_0 450	MultiLift 450 s	452 mm	657.5 mm			7.1
qab 26_g 0_0 500	MultiLift 500 s	498 mm	702.5 mm			7.4

7 = for mono control/transformer
8 = for synchronous control

color powder coats upon request

h = for compressive load (standard)
i = for compressive and tensile load (add.
bottom assembly plate
m = for compressive and tensile load (add. bottom compression
plate)

We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Krieger is not responsible for inadvertent errors.


Labeling Machine	Transfer System	X-ray Machine	Height Adjustable Assembly Stations