Actuators

Electronic Handwheel EHL

The Electronic Handwheel EHL is a cost-effective alternative to the traditional manual adjustment. It is primarily used for the adjustment of linear components within danger zones and machines that are not easily accessible.
     The EHL is driven by a 24 V DC motor and can be combined with a transformer rectifier if requested.
     Two speed variations with 50 and 135 rpm are available.

Features:
• Manufactured according to VDE, protection class II
• Different versions available
• Robust plastic housing
• Color: light gray mat according to RAL 7035, other colors
   upon request.

1	3	5	7

EHL with transformer and hand switch	EHL without transformer front and rear view	EHL with speed control	EHL, speed control without housing

2	4	6	8

EHL with transformer and hand switch	EHL without transformer front and rear view	EHL with speed control	EHL, speed control without housing

Please Note: The EHL should exclusively be used with limit switches. This avoids the guide table reaching the extremity of the linear unit and further defects, which could occur due to this error.

Electronic Handwheel EHL
Code Number	Type	Speed	Driving Torque	Clevis	Version
90900	EHL with transformer and hand switch	50 [min^-1]	5.5 Nm	yes	1
90963	EHL with transformer and hand switch	50 [min^-1]	5.5 Nm	no	2
90911	EHL with transformer and hand switch	135 [min^-1]	2 Nm	yes	1
90964	EHL with transformer and hand switch	135 [min^-1]	2 Nm	no	2
90910	EHL without transformer	50 [min^-1]*	5.5 Nm	yes	3
90960	EHL without transformer	50 [min^-1]*	5.5 Nm	no	4
90912	EHL without transformer	135 [min^-1]*	2 Nm	yes	3
90962	EHL without transformer	135 [min^-1]*	2 Nm	no	4
90944	EHL with speed control and transformer	50 [min^-1]	5.5 Nm	yes	5
90965	EHL with speed control and transformer	50 [min^-1]	5.5 Nm	no	6
90945	EHL with speed control and transformer	135 [min^-1]	2 Nm	yes	5
90966	EHL with speed control and transformer	135 [min^-1]	2 Nm	no	6
90949	EHL with speed control without housing for s.s.	50 [min^-1]	5.5 Nm	yes	7
90950	EHL with speed control without housing for s.c.	135 [min^-1]	2 Nm	yes	7
90948	Retrofit kit for all EHL with transformer	complete with pcb, speed control and adaption

*In connection with RK transformer control (36 min^-1 in case the customer provides a 24 V supply voltage).


Labeling Machine	Transfer System	X-ray Machine	Height Adjustable Assembly Stations


Versions