Protection Systems

Back to GMS Steel Protection Systems Index

Lattice Mats

Steel lattice mats (6 mm) are available in the mesh sizes 25/200. The EN 294 governs the distance to danger zones and the allowed openings dimensions (to prevent the machine from being reached) of the protection system. The standard lattice mats are RAL 7035 (light gray) powder-coated. Special colors (RAL 9005, jet black, RAL 3001 signal red, RAL 1003 yellow) are available upon request.

Lattice Mats


Part Number	Code Number	Type	Center-to-Center Distance Between Posts	A	B	C
	BBD10128008BAB	1012 x 1800 x 25	1015	<20	1012	24.56
	BBD14541800BAB	1454 x 1800 x 25	1460	<20	1454	24.56
	BBD25101800BAB	2510 x 1800 x 25	2515	<20	2510	24.56

Assembling Lattice Mats

The lattice mats are inserted in the holders, which are already premounted to the posts. The cams on the holders serve as assembly aid and provide for the lattice mats to hold their position. Afterwards the spring clip is pressed on the holder, which has two catching teeth. The spring clip can be easily locked to the first catching tooth manually. After checking the alignment of the lattice mats the stainless steel clip can be locked to the second catching tooth by pressing it. Therefore a rubber hammer can be used if necessary. To remove the spring clips you can make use of two screwdrivers, which you can insert in the lateral bores and use as levers to unlock the spring clip from its fastening.

CNC Frame and Guard

Assembly Work Bench

Protection and Partition System

Custom Machine Guard

We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. RK Rose+Krieger is not responsible for inadvertent errors.