HOME     |      ABOUT US    |     CONTACT US     |     PRODUCTS      |     SERVICES     |    TECHNICAL    |     NEWS   |      SITE MAP


 

EIB Insert Clamp

 


 


 
 

 

Closed design. Insert end fits in clamp to allow single tube a full 360º pivot. Tighten second clamp to lock angle.



 

 

EIB Insert Clamps - Metric Sizes
CODE
 NUMBER		 PART
NUMBER		 TYPE A† B C D G H K L P Q S T m [g] CAD
563 000 140 EIB.0030 SK 30 30.1 30 36 49 85 21 42 42 28 7 M6x25 29.5 268
564 000 140 EIB.0040 SK 40 40.1 40 48 62 110 28 56 56 42 7 M6x35 39.5 595
565 000 140 EIB.0050 SK 50 50.2 50 60 77 137 35 70 70 52 9 M8x45 49.5 109
Dimensions in millimeters unless otherwise noted.  † = Tube Hole

 

Spray Applicators Holder Tubular Computer Stand Fixturing Jig Machine Control Holder
We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. RK Rose+Krieger is not responsible for inadvertent errors.  

©2009 Phoenix Mecano Inc., 7330 Executive Way, Frederick, MD 21704, 301-696-9400, rkinfo@pm-usa.com