HOME     |      ABOUT US    |     CONTACT US     |     PRODUCTS      |     SERVICES     |    TECHNICAL    |     NEWS    |      SITE MAP

 

EIA Insert Clamp

 



 
 

 

Closed design. Insert end fits in clamp to allow single tube a full 360º pivot. Tighten second clamp to lock angle.



 

 

EIA Insert Clamps - Metric Sizes
CODE
NUMBER		 PART
 NUMBER		 TYPE A† B C D E G H K L P Q R S m [g] CAD
563 000 130 EIA.0030 SW 30 30.1 30 21 49 30 78 57 42 42 28 7 26 M6x25 289
564 000 130 EIA.0040 SW 40 40.1 40 28 62 40 104 76 56 56 42 7 40 M6x35 644
565 000 130 EIA.0050 SW 50 50.2 50 35 77 50 130 95 70 70 50 9 50 M8x45 1256
Dimensions in millimeters unless otherwise noted.  † = Tube Hole

 

Spray Applicators Holder Tubular Computer Stand Fixturing Jig Machine Control Holder
We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. RK Rose+Krieger is not responsible for inadvertent errors.  

©2009 Phoenix Mecano Inc., 7330 Executive Way, Frederick, MD 21704, 301-696-9400, rkinfo@pm-usa.com