HOME     |      ABOUT US    |     CONTACT US     |     PRODUCTS      |     SERVICES     |    TECHNICAL    |     NEWS    |      SITE MAP

 

EXE Cross Clamp

 


 
 

 

Split design. Connects dual sets of round and square tubes at a 90º angle or dual round or dual square tubes in parallel.



 

 

EXE Cross Clamps - Metric Sizes
CODE NUMBER PART
 NUMBER		 TYPE A† B† C D L M P Q S m [g] CAD
503 000 040 EXE.0030 KVR 30 30.1 30.2 36 78 56 56 42 42 M6x25 301
504 000 040 EXE.0040 KVR 40 40.2 40.3 48 104 68 68 54 54 M6x35 527
505 000 040 EXE.0050 KVR 50 50.3 50.4 60 130 85 85 67 67 M8x45 1080
506 000 040 EXE.0060 KVR 60 60.3 60.4 72 169 105 105 85 85 M8x60 -  
Dimensions in millimeters unless otherwise noted.  † = Tube Hole

 

Spray Applicators Holder Tubular Computer Stand Fixturing Jig Machine Control Holder
We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Krieger is not responsible for inadvertent errors.  

©2008 Phoenix Mecano Inc., 7330 Executive Way, Frederick, MD 21704, 301-696-9400, rkinfo@pm-usa.com