Industrial Clamps

RAF Angle Clamp

WE 12-18

WE 20-48

WE 30, WE 40, WE 50

Closed design. Triple round tubes. 90º corner connections.

RAF Angle Clamps - Inch Sizes
CODE NUMBER	PART NUMBER	TYPE	A†	B†	C	D	E	G	H	K	L	M	R	S	T	m [g]	CAD
Inch clamps available in USA, Canada and Mexico only	RAF.0505	WE	.50	.50	12	25	25	32	20	-	54	42	36	M6x25	M6x25	141
	RAF.0606	WE	.625	.625	14	25	25	32	20	-	54	42	36	M6x25	M6x25	133
	RAF.0707	WE	.75	.75	18	25	25	32	20	-	54	42	36	M6x25	M6.25	116
	RAF.1010	WE	1.00	1.00	25	40	45	40	35	51	80	60	49	M8x35	M8x15	323
	RAF.1212	WE	1.25	1.25	30	40	45	40	35	51	80	60	49	M8x35	M8x15	250
	RAF.1515	WE	1.50	1.50	35	56	60	56	55	69	116	88	70	M10x50	M8x10	909
	RAF.1717	WE	1.75	1.75	40	56	60	56	55	69	116	88	70	M10x50	M8x10	769
	RAF.2020	WE	2.00	2.00	50	66	70	66	65	78	136	103	82	M10x60	M10x12	996
RAF Angle Clamps - Metric Sizes
111 200 060	RAF.0012	WE 12	12	12	12	25	25	32	20	-	54	42	36	M6x25	M6x25	141
111 400 060	RAF.0014	WE 14	14	14	14	25	25	32	20	-	54	42	36	M6x25	M6x25	133
111 600 060	RAF.0016	WE 16	16	16	16	25	25	32	20	-	54	42	36	M6x25	M6x25	125
111 800 060	RAF.0018	WE 18	18	18	18	25	25	32	20	-	54	42	36	M6x25	M6x25	116
112 000 060	RAF.0020	WE 20	20	20	20	40	45	40	35	51	80	60	49	M8x35	M8x15	390
112 500 060	RAF.0025	WE 25	25.1	25.1	25	40	45	40	35	51	80	60	49	M8X35	M8x15	323
113 000 060	RAF.0030	WE 30	30.1	30.1	30	40	45	40	35	51	80	60	49	M8x35	M8x15	250
113 200 060	RAF.0032	WE 32	32.2	32.2	32	56	60	56	55	69	116	88	70	M10x50	M8x10	977
113 500 060	RAF.0035	WE 35	35.2	35.2	35	56	60	56	55	69	116	88	70	M10x50	M8x10	909
114 000 060	RAF.0040	WE 40	40.2	40.2	40	56	60	56	55	69	116	88	70	M10x50	M8x10	769
114 200060	RAF.0042	WE 42	42.2	42.2	42	66	70	66	65	78	136	103	82	M10x60	M10x12	1365
114 500 060	RAF.0045	WE 45	45.2	45.2	45	66	70	66	65	78	136	103	82	M10x6.	M10x12	1250
114 800 060	RAF.0048	WE 48	48.2	48.2	48	66	70	66	65	78	136	103	82	M10x60	M10x12	1113
115 000 060	RAF.0050	WE 50	50.2	50.2	50	66	70	66	65	78	136	103	82	M10x60	M10x12	996
Dimensions in millimeters unless otherwise noted. † = Tube Hole

We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Rose+Krieger is not responsible for inadvertent errors.


Spray Applicators Holder	Tubular Computer Stand	Fixturing Jig	Machine Control Holder