HOME     |      ABOUT US    |     CONTACT US     |     PRODUCTS     |     SERVICES     |    TECHNICAL    |     NEWS    |      SITE MAP

 


RIG Pulley Clamp
 


 


 

 



 

Split design. Single round tube. 90º connection with a plastic (polyamide) pulley. Pulley holds up to 120 lbs.

 

RIG Pulley Clamps - Inch Sizes

CODE NUMBER PART NUMBER TYPE A† B ** C D E G H L M P S m [g] CAD
Inch clamps available in USA, Canada and Mexico only RIG.1700* SRO 1.75" 100 8 86 86 79 100 189.5 10 65 M8x70 1170
RIG.2000* SRO 2.00" 100 8 86 86 79 100 189.5 10 65 M8x70 1200
                  *5 Piece Minimum

RIG Pulley Clamps - Metric Sizes

264 200 070 RIG.0042 SRO 42 42.3 100 8 86 86 79 100 189.5 10 65 M8x70 1170
264 500 070 RIG.0045 SRO 45 45.3 100 8 86 86 79 100 189.5 10 65 M8x70 1180
264 800 070 RIG.0048 SRO 48 48.3 100 8 86 86 79 100 189.5 10 65 M8x70 1190
265 000 070 RIG.0050 SRO 50 50.3 100 8 86 86 79 100 189.5 10 65 M8x70 1200
Dimensions in millimeters unless otherwise noted. 
† = Tube Hole.   
Plastic pulley: 120 lbs. maximum load.
**B is the maximum diameter of swivel insert.

Spray Applicators Holder Tubular Computer Stand Fixturing Jig Machine Control Holder

We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. RK Rose+Krieger is not responsible for inadvertent errors.  

©2010 Phoenix Mecano Inc., 7330 Executive Way, Frederick, MD 21704, 301-696-9400, rkinfo@pm-usa.com