HOME     |      ABOUT US    |     CONTACT US     |     PRODUCTS     |     SERVICES     |    TECHNICAL    |     NEWS    |      SITE MAP

 


RIC Pivot Clamp
 


 


 
 

 



 

Split design. Insert end "B" fits inside another 50mm clamp to allow single round tube to pivot 360º.
 


 

 

RIC Pivot Clamps - Inch Sizes
CODE NUMBER PART
NUMBER		 TYPE A† B C D E G L P S m [g] CAD
Inch clamps available in USA, Canada and Mexico RIC.1700 SR 1.75" 50 85 86 86 79 164 65 M8x70 1134  
RIC.2000 SR 2.00" 50 85 86 86 79 164 65 M8x70 1116  

RIC Pivot Clamps - Metric Sizes
264 200 030 RIC.0042 SR 42 42.3 50 85 86 86 79 164 65 M8x70 1134  
264 500 030 RIC.0045 SR 45 45.3 50 85 86 86 79 164 65 M8x70 1122  
264 800 030 RIC.0018 SR 48 48.3 50 85 86 86 79 164 65 M8x70 1106  
265 000 030 RIC.0050 SR 50 50.3 50 85 86 86 79 164 65 M8x70 1116  
Dimensions in millimeters unless otherwise noted.  † = Tube Hole

 

Spray Applicators Holder Tubular Computer Stand Fixturing Jig Machine Control Holder
We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. RK Rose+Krieger is not responsible for inadvertent errors.  

©2009 Phoenix Mecano Inc., 7330 Executive Way, Frederick, MD 21704, 301-696-9400, rkinfo@pm-usa.com