HOME     |      ABOUT US    |     CONTACT US     |     PRODUCTS     |     SERVICES     |    TECHNICAL    |     NEWS     |      SITE MAP

 


RHP Hinge Clamp
 


 


 
 

 

Split design. Dual round tube connects parallel to a surface. With ratchet teeth engaging every 15º intervals to 360º. Tighten center bolt to fix angle.
 


 

 

RHP Hinge Clamps - Inch Sizes
CODE NUMBER PART
NUMBER		 TYPE A† B C D E G K L N P S m [g] CAD
Inch clamps available in USA, Canada and Mexico only RHP.1700 GFKRZ 1.75" 8.5 58 70 70 125 98 88.5 20 53 M6x55 1066  
RHP.2000 GFKRZ 2.00 8.5 70 86 86 125 98 109.5 20 65 M8x70 1565  

RHP Hinge Clamps - Metric Sizes
284 000 130 RHP.0040 GFKRZ 40 40.2 8.5 58 70 70 125 98 88.5 20 53 M6x55 1066  
284 200 130 RHP.0042 GFKRZ 42 42.3 8.5 70 86 86 125 98 109.5 20 65 M8x70 1615  
284 500 130 RHP.0045 GFKRZ 45 45.3 8.5 70 86 86 125 98 109.5 20 65 M8x70 1590  
284 800 130 RHP.0048 GFKRZ 48 48.3 8.5 70 86 86 125 98 109.5 20 65 M8x70 1576  
285 000 130 RHP.0050 GFKRZ 50 50.3 8.5 70 86 86 125 98 109.5 20 65 M8x70 1565  
Dimensions in millimeters unless otherwise noted.  † = Tube Hole

 

Spray Applicators Holder Tubular Computer Stand Fixturing Jig Machine Control Holder
We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. RK Rose+Krieger is not responsible for inadvertent errors.  

©2009 Phoenix Mecano Inc., 7330 Executive Way, Frederick, MD 21704, 301-696-9400, rkinfo@pm-usa.com