HOME     |      ABOUT US    |     CONTACT US     |     PRODUCTS     |     SERVICES     |    TECHNICAL    |     NEWS    |      SITE MAP
 


RHN Hinge Clamp
 


 


 
 



 

Split design. Dual square tubes cross or in parallel. With ratchet teeth engaging at 15º intervals to 360º. Tighten center bolt to fix angle.
 

RHN Hinge Clamps - Inch Sizes
CODE NUMBER PART
NUMBER		 TYPE A† B† C D E L S m [g] CAD
Inch clamps available in USA, Canada and Mexico only RHN.1717* GKVZ 1.75" 1.75" 75 70 70 137 M6x55 834
RHN.2020* GKVZ 2.00" 2.00" 100 86 86 179 M8x70 1826

                         *5 Piece Minimum

RHN Hinge Clamps - Metric Sizes
284 000 110 RHN.0040 GKVZ 40 40.4 40.4 75 70 70 137 M6x55 834
285 000 110 RHN.0050 GKVZ 50 50.5 50.5 100 86 86 179 M8x70 1826
Dimensions in millimeters unless otherwise noted.                        † = Tube Hole                      

Spray Applicators Holder Tubular Computer Stand Fixturing Jig Machine Control Holder
We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. RK Rose+Krieger is not responsible for inadvertent errors.  

©2010 Phoenix Mecano Inc., 7330 Executive Way, Frederick, MD 21704, 301-696-9400, rkinfo@pm-usa.com