HOME     |      ABOUT US    |     CONTACT US     |     PRODUCTS     |     SERVICES     |    TECHNICAL    |     NEWS    |      SITE MAP
 


RHL Hinge Clamp
 


 


 
 


 

Split design. Single square tube connects parallel to a surface. Swivels to allow a full 360º pivot. Pressure fit. Tighten center bolt to fix angle.
 

RHL Hinge Clamps - Inch Sizes
CODE NUMBER PART NUMBER TYPE A† B C D E G K L N P S m [g] CAD
Inch clamps available in USA, Canada and Mexico RHL.1700* GFKV 1.75" 8.5 58 70 70 125 98 88.5 20 53 M6x55 1025  
RHL.2000* GFKV 2.00" 8.5 70 86 86 125 98 110 20 65 M8x70 1515  

                   *5 Piece Minimum

RHL Hinge Clamps - Metric Sizes
284 000 140 RHL.0040 GFKV 40 40.4 8.5 58 70 70 125 98 88.5 20 53 M6x55 1025  
285 000 140 RHL.0050 GFKV 50 50.5 8.5 70 86 86 125 98 110 20 65 M8x70 1515  
Dimensions in millimeters unless otherwise noted.                           † = Tube Hole                        

Spray Applicators Holder Tubular Computer Stand Fixturing Jig Machine Control Holder
We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. RK Rose+Krieger is not responsible for inadvertent errors.  

©2010 Phoenix Mecano Inc., 7330 Executive Way, Frederick, MD 21704, 301-696-9400, rkinfo@pm-usa.com