HOME     |      ABOUT US    |     CONTACT US     |     PRODUCTS     |     SERVICES     |    TECHNICAL    |     NEWS    |      SITE MAP

 


RHK Hinge Clamp
 


 


 
 

 



 

Split design. Single round tube connect parallel to a surface. Swivels to allow a full 360º pivot. Pressure fit. Tighten center bolt to fix angle.
 


 

 

RHK Hinge Clamps - Inch Sizes
CODE NUMBER PART
NUMBER		 TYPE A† B C D E G K L N P S m [g] CAD
Inch clamps available in USA, Canada and Mexico RHK.1700 GFKR 1.75" 8.5 58 70 70 125 98 88.5 20 53 M6x55 1064  
RHK.2000 GFKR 2.00" 8.5 70 86 86 125 98 109.5 20 65 M8x70 1566  

RHK Hinge Clamps - Metric Sizes
284 000 120 RHK.0040 GFKR 40 40.2 8.5 58 70 70 125 98 88.5 20 53 M6x55 1064  
284 200 120 RHK.0042 GFKR 42 42.3 8.5 70 86 86 125 98 109.5 20 65 M8x70 1606  
284 500 120 RHK.0045 GFKR 45 45.3 8.5 70 86 86 125 98 109.5 20 65 M8x70 1576  
284 800 120 RHK.0048 GFKR 48 48.3 8.5 70 86 86 125 98 109.5 20 65 M8x70 1570  
285 000 120 RHK.0050 GFKR 50 50.3 8.5 70 86 86 125 98 109.5 20 65 M8x70 1566  
Dimensions in millimeters unless otherwise noted.  † = Tube Hole

 

Spray Applicators Holder Tubular Computer Stand Fixturing Jig Machine Control Holder
We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. RK Rose+Krieger is not responsible for inadvertent errors.  

©2009 Phoenix Mecano Inc., 7330 Executive Way, Frederick, MD 21704, 301-696-9400, rkinfo@pm-usa.com