HOME     |      ABOUT US    |     CONTACT US     |     PRODUCTS     |     SERVICES     |    TECHNICAL    |     NEWS    |      SITE MAP
 


RHJ Hinge Clamp
 


 


 
 



 

Split design. Dual square tubes cross or in parallel. Swivels to allow a full 360º pivot. Pressure fit. Tighten center bolt to fix angle.
 

RHJ Hinge Clamps - Inch Sizes
CODE
NUMBER		 PART
 NUMBER		 TYPE A† B† C D E L S m [g] CAD
Inch clamps available in USA, Canada and Mexico only RHJ.1717* GKV 1.75" 1.75" 75 70 70 137 M6x55 827
RHJ.2020* GKV 2.00" 2.00" 100 86 86 179 M8x70 1816

                         *5 Piece Minimum

RHJ Hinge Clamps - Metric Sizes
284 000 100 RHJ.0040 GKV 40 40.4 40.4 75 70 70 137 M6x55 827
285 000 100 RHJ.0050 GKV 50 50.5 50.5 100 86 86 179 M8x70 1816
Dimensions in millimeters unless otherwise noted.                     † = Tube Hole                       

Spray Applicators Holder Tubular Computer Stand Fixturing Jig Machine Control Holder
We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. RK Rose+Krieger is not responsible for inadvertent errors.  

©2010 Phoenix Mecano Inc., 7330 Executive Way, Frederick, MD 21704, 301-696-9400, rkinfo@pm-usa.com