HOME     |      ABOUT US    |     CONTACT US     |     PRODUCTS     |     SERVICES     |    TECHNICAL    |     NEWS    |      SITE MAP
 


RHI Hinge Clamp
 


 


 
 



 

Split design. Dual round tubes cross or in parallel. Swivels to allow a full 360º pivot. Pressure fit. Tighten center bolt to fix angle.

RHI Hinge Clamps - Inch Sizes
CODE
NUMBER		 PART
NUMBER		 TYPE A† B† C D E L S m [g] CAD
Inch clamps available in USA, Canada and Mexico only RHI.1717* GKR 1.75" 1.75" 75 70 70 137 M6X55 899
RHI.2020* GKR 2.00" 2.00" 100 86 86 179 M8x70 1903

                         *5 Piece Minimum

RHI Hinge Clamps - Metric Sizes
284 000 080 RHI.0040 GKR 40 40.2 40.2 75 70 70 137 M6x55 899
284 200 080 RHI.0042 GKR 42 42.3 42.3 100 86 86 179 M8x70 1997
284 500 080 RHI.0045 GKR 45 45.3 45.3 100 86 86 179 M8x70 1941
284 800 080 RHI.0048 GKR 48 48.3 48.3 100 86 86 179 M8x70 1946
285 000 080 RHI.0050 GKR 50 50.3 50.3 100 86 86 179 M8x70 1903
Dimensions in millimeters unless otherwise noted.                       † = Tube Hole                         
 

Spray Applicators Holder Tubular Computer Stand Fixturing Jig Machine Control Holder
We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. RK Rose+Krieger is not responsible for inadvertent errors.  

©2010 Phoenix Mecano Inc., 7330 Executive Way, Frederick, MD 21704, 301-696-9400, rkinfo@pm-usa.com