Block Clamps

RAP Angle Clamp

Split/closed design. Triple round tubes. 90º corner connections.

RAP Angle Clamps - Inch Sizes
CODE NUMBER	PART NUMBER	TYPE	A†	B†	C	D	E	H	K	L	M	N	P	Q	R	S	T	m [g]	CAD
Inch clamps available in USA, Canada and Mexico only	RAP.1515*	WER	1.25"	1.25"	35	62	70	70	9	141	106	16	53	8.5	53	M6x55	M6x55	1340
	RAP.1717*	WER	1.50"	1.50"	35	62	70	70	9	141	106	16	53	8.5	53	M6X55	M6X55	1340
	RAP.2020*	WER	2.00"	2.00"	50	79	86	85	10	173	130	19	65	10.5	65	M8x70	M8x75	2613
*5 Piece Minimum
RAP Angle Clamps - Metric Sizes
213 200 070	RAP.0032	WER 32	32.2	32.2	32	62	70	70	9	141	106	16	53	8.5	53	M6x55	M6x55	1448
213 500 070	RAP.0035	WER 35	35.2	35.2	35	62	70	70	9	141	106	16	53	8.5	53	M6x55	M6x55	1340
214 000 070	RAP.0040	WER 40	40.2	40.2	40	62	70	70	6	141	106	16	53	8.5	53	M6X55	M6X55	1275
214 200 070	RAP.0042	WER 42	42.2	42.3	42	79	86	85	10	173	130	19	65	10.5	65	M8x70	M8x75	2760
214 500 070	RAP.0045	WER 45	45.2	45.3	45	79	86	85	10	173	130	19	65	10.5	65	M8x70	M8x75	2698
214 800 070	RAP.0048	WER 48	48.2	48.3	48	79	86	85	10	173	130	19	65	10.5	65	M8x70	M8x75	2644
215 000 070	RAP.0050	WER 50	50.2	50.3	50	79	86	85	10	173	130	19	65	10.5	65	M8x70	M8x75	2613

We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. RK Rose+Krieger is not responsible for inadvertent errors.


Spray Applicators Holder	Tubular Computer Stand	Fixturing Jig	Machine Control Holder