| Modular System |
| |
| The modular system
concentrates on essential aspects i.e. the protective
function and the assembly with minimum time expenditure. |
| |
|
Features: |
| • easy, quick assembly
directly on site |
• rapid assembly and
disassembly of single frames
e.g. for machine maintenance |
• can be assembled at any
desired angle and is
therefore optimally adjustable to any particular
condition |
• frames with the same lattice
dimensions are
interchangeable |
| Widths:
center-to-center distance between the pillars |
| Heights: total height |
|
 |
|
|
*referring to pillar
profile 50. When using pillar profile S-40 add respectively 10 mm to
the surface width. |
|
|
|
| Proceeding |
| |
| 1. Planning |
| |
| a) Fix the required
lengths |
|
Example: a machine measuring 5.50m
x 3.50m must be provided with a protection system.
Considering the safety distances the results is a rectangle
of approx. 6m x 4m. |
|
|
b) Now, with the aid of
different module dimensions the design of the protection
system can be fitted for particular requirements. In our
example we adopted the following solution:
4 m side = 2 x 2.0 m module
6 m side = 4 x 1.5 m module
Number of pillars = 12 |
| |
|
|
|
|
|
|
|
Material Requirements |
a) different frame versions with varying
surface elements are
shown |
|
|
b) furthermore, hinged doors, sliding
doors and vertical-lift
doors are available to be also applied to the modular
system |
|
|
c) there are two different types of
pillars: |
|
|
protection system =
pillar with base clamp (type 1 and 2) |
|
|
partitioning system =
pillar with base plate (type 3) |
|
|
|
|
 |
|
| Pillar |
| |
| •
consists of pillar profile
50 / S-profile 40 / F-profile-50 |
| • pedestal version at
your choice |
|
|
|
|
|
| Application |
| |
| |
|
 |
|
|
|
| Type 1 FFV |
 |
|
|
|
Type 2 FVA
for pillar profile 50,
F-50 |
 |
|
|
|
Type 3 FP
for pillar profile 50,
F-50, S-40 |
 |
|
|
|
|
