HOME     |      ABOUT US    |     CONTACT US     |     PRODUCTS     |     SERVICES     |    TECHNICAL    |    NEWS    |      SITE MAP

RK Light Clamps

The RK Light Design is a flexible system that enables clamping of different diameters of tube sections (round or square with the same basic clamp element by simply replacing the bush. In contrast to closed, half-shell elements can also be used to modify existing strustures.


Advantages
 

• Only one main clamp element is required per
   construction type (Ø18 / Ø30 etc.).
• Elements are made of reinforced polyamide.
• Optional stainless steel screws are available.
• Different tube diameters can used with the same
  clamp element by using different reducing
  bushes for round and square tubes.
• Tube diameters are noted on each reducing
   bush.
• Twisting is prevented inside the clamping
   element by means of bushes.
• Compatibility with Frameworks® profile system

A special characteristic of the RK Light Design product range is its compatibility with the Frameworks® profile system. Because the mounting hole spacing has been matched to the profile slots.
 

BLOCK CLAMPS

INDUSTRIAL CLAMPS

QUAD CLAMPS

LIGHT CLAMPS


We have attempted to present the information on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. RK Rose+Krieger is not responsible for inadvertent errors.  

©2010 Phoenix Mecano Inc., 7330 Executive Way, Frederick, MD 21704, 301-696-9400, rkinfo@pm-usa.com