Electric Cylinders

RK Rose+Krieger presents a complete new electric cylinder characterized by excellent functionality, high power density and appealing design. It can be perfectly applied in industrial, medical and fitness equipments.
     The drive unit can be assembled either within the bar-shaped cylinder unit (LZ 60 S) or externally parallel to it (LS 60 P). The LZ 60 P version is ideal for particularly demanding constructions.
     Here you can choose between two versions: one with external control (selection of controls) and one with integrated control. Due to constructional reasons the motor enclosure of the electric cylinder with integrated control. Due to constructional reasons the motor enclosure of the electric cylinder with integrated control is slightly longer (see illustration above).
     Among the accessories magnetic switches are available.
     The connection system of the LZ 60 is fully compatible with the one of the traditional pneumatic and hydraulic cylinders, so that the latter one can be substituted easily and at low cost by the new electric cylinders at any time.

Features: • different electrical connections available


Electrical Connection A	Electrical Connection B	Electrical Connection C	Electrical Connection D
Connection to the RK transformer control or to an external fixed voltage source, only by means of a connecting cable (2.5m), Internally wired limit switch	All connection cables (ca. 1m) are directly lead through (limit switch, motor 2-circuit Hall sensor) e.g. connection to PLC	Connection cable (2.5M0 to a RK synchronous control	The cable (3 m length) and the 2-key hand switch are connected directly to the motor enclosure.

A magnetic switch can be later inserted in the slot.

If required the square nuts can be later pushed in the
fixation slots.

Features:
• slot system on both sides for the fixation of additional parts
• additional, insertable magnetic switches

By means of the insertable clasp nuts fitting dimensions between 37.5 and 40.5 mm can be obtained, thus enabling the use of pneumatic fixation elements.

Features:
• self-locking
• torsion-secured connecting shaft
• integrated limit switch
• mounting position according to customers requirements
• maintenance-free (permanent lubrication)
• different travels and speeds
• ball screws with 5 mm pitch


Labeling Machine	Transfer System	X-ray Machine	Height Adjustable Assembly Stations